|
|
Post by blinkycats on Mar 3, 2010 19:51:39 GMT -5
Okay. I had to buy another verison of 2001, the translation version -- FINALLY! I made a copy of my dictionary that was on my XEC5 and I converted it to my 2001. Now what? I go to File Manager to restore it, but it says I have an error. Im really getting frustrated!!
Also, do I have to load my dictionary into my Steno ram Ultra? If so, how do I do that?
|
|
|
|
Post by Michael Smith on Mar 4, 2010 19:03:43 GMT -5
Hi blinkycats,
If the dictionary was properly converted, you should have provided a name for the dictionary when it was converted (pg 8-38 2001 Manual). From the dictionary menu, choose Edit, and then select your dictionary.
As for not being able to access your file manager, that sounds like 2001 is not set up properly.
You can try adding the following to Autoexec.bat:
C:\WINDOWS\SMARTDRV.EXE (Windows) OR
C:\DOS\SMARTDRV.EXE (DOS)
If you've got either Windows 95 or Windows 98 on the computer at all, use the Windows line. If you have MS-DOS v6.22 or lower, then use the lower line. Once complete, restart and try to access the file manager again. If 2001 is unable to start for any reason, go back and remove the line you added.
|
|
|
|
Post by blinkycats on Mar 5, 2010 11:15:04 GMT -5
I can see my dictionary when I hit Edit, but it's not translating my notes. So now what can I do?
|
|
|
|
Post by Michael Smith on Mar 5, 2010 18:31:55 GMT -5
Hi blinkycats,
When you go to translate a job, you are prevented with an options page. From here you can choose which dictionary you wish to translate against. Select the dictionary you had converted and it should now translate.
|
|
|
|
Post by blinkycats on Mar 5, 2010 23:10:53 GMT -5
Ugh! This is frustrating! I tried that..it's still not working. Getting a friend's dictionary to see if her's works. We'll see...
|
|
|
|
Post by blinkycats on Mar 6, 2010 11:49:07 GMT -5
HI again, I got a copy of my friend's dictionary off her 2001, 4 disks long, but now I don't have a CLUE how to put this into the 2001. This is absolutely driving me nuts! Nothing is working. I have used a 2001 for 4 years, but it was never this hard to get a dictionary in. Please HELP!! I can't figure out how to load her 2001 dictionary into my 2001!! I went through my manuals several times. I know I did the XEC5 conversion right, but it's not working! I cannot afford to take any more time off work! So what I need to know is how to put a 2001 dictionary into a 2001.
|
|
|
|
Post by blinkycats on Mar 8, 2010 16:37:59 GMT -5
Okay. I got it!!! I never got a manual with this version, so I had to call several people and go to the DOS prompt and type in restore a: c:*.* /s and return. that did it! YEAH!!
Thank you for all your help!!
|
|
|
|
Post by Michael Smith on Mar 8, 2010 19:05:41 GMT -5
Hi blinkycats,
I'm glad you were able to get everything working. Please let us know if there is anything else we can assist you with.
|
|
